RG-AP820-L(V2) Wireless Access Point

฿

RG-AP820-L(V2) Wireless Access Point is the Ruijie’s highest price-performance entry Wi-Fi 6 enterprise indoor access point. Certified by Tolly’s latest Test Report , the RG-AP820-L(V2) verified on user capacity upto 1024 Wi-Fi clients, and provide upto 65% higher total throughput in legacy Wi-Fi 5 environment.

สั่งจองสินค้าได้

รหัสสินค้า RG-AP820-L(V2) หมวดหมู่ , , ,

แชร์สิ่งนี้

Share on facebook
Share on twitter
Share on reddit
Share on pinterest

ข้อมูลเพิ่มเติม

น้ำหนัก 0.5 kg
ขนาด 15.3 × 19.3 × 2.6 cm
แบรนด์

Ruijie

Model

RG-AP820-L(V2)

ประเภทสินค้า

Wireless

ประเภทสินค้า

Indoor Access Point

Radio

Dual-radio dual-band, Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO, Radio 2: 5G 11ax: 2×2 MIMO

Protocol

Concurrent 802.11ax and 802.11a/b/g/n/ac, dual-radio dual-band, Supports standard 802.11ax

Operating Bands

802.11a/n/ac/ax : 5.150~5.350GHz / 5.47~5.725GHz / 5.725~5.850GHz (vary depending on different countries), 802.11b/g/n :2.4G ~ 2.483GHz

Spatial Streams

2×2:2 in 5GHz, Up to 4: 2×2:2 in 2.4GHz

Max Throughput

(5G+5G mode) per AP: 2.4Gbps, 2.4G+5G operation mode maximum throughput per AP: 1.775Gbps, Radio1:2.4G 0.574Gbps, Radio1:5G low band 1.2Gbps, Radio2:5G 1.2Gbps, Radio2:5G high band 1.2Gbps

Modulation

DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps, MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM, OFDMA (up to 1024-QAM)

Receiver Sensitivity

11a/g:-91dBm(6Mbps)| -85dBm(24Mbps)| -80dBm(36Mbps)| -74dBm(54Mbps), 11ac HT20:-88dBm(MCS0)| -63dBm(MCS9), 11ac HT40:-85dBm(MCS0)| -60dBm(MCS9), 11ac HT80:-82dBm(MCS0)| -57dBm(MCS9), 11ax HT160:-80dBm(MCS0)| -49dBm(MCS11), 11ax HT80:-82dBm(MCS0)| -57dBm(MCS9)| -52dBm(MCS11), 11b:-96dBm(1Mbps)| -93dBm(5Mbps)| -89dBm(11Mbps), 11n:-90dBm(MCS0)| -70dBm(MCS7)| -89dBm(MCS8)| -68dBm(MCS15)

Antenna

Integrated antenna design

Antenna Gain

2.4G: 3dBi, 5G: 3dBi

Service Ports

1 10/100/1000M Ethernet ports, PoE In

Management Port

1 console port

USB

Not Support

IoT Capability

Not Support

Reset Button

Support

Anti-theft Lock

Support

LED Indicator

1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.)

Transmit Power

≤100mw(20dBm) (vary depending on different countries)

Adjustable Power

1dBm

Power supply

Local power supply (DC 48V/1A) (Power adapters are sold separately), PoE (802.3af) – full spectrum operation

Power consumption

<12.95W

Temperature

Operating Temperature: -10°C to 50°C, Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing), Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable

IP Rating

IP41

Safety Standard

EN/IEC 60950-1, GB4943

EMC Standard

EN301 489, GB9254

Health Standard

Not Support

Radio Standard

EN300 328, EN301 893, SRRC

WLAN

5G Priority (Band Steering): Support, 802.1x authentication: Support, Bandwidth control: STA/SSID/AP-based bandwidth control, BSSID capacity: Up to 32, Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID: Support, CPU Protection Policy (CPP): Support, Data encryption: WEP(64/128 bits), Data encryption: WPA-PSK, WPA2(AES), Data encryption: WPA(TKIP), Data frame filtering: Whitelist, static/dynamic blackl, Dynamic ACL assignment: Support, Intelligent device recognition technology: Support, Intelligent load balancing based on the number of users or traffic: Support, Maximum clients per AP: 1024, Network Foundation Protection Policy (NFPP): Support, PEAP authentication: Support, PPSK authentication (For Employee): Support (require wireless controller), PSK and web authentication: Support, RADIUS: Support, Recommended clients per AP: 64, Remote Intelligent Perception Technology (RIPT): Support, Rogue AP detection and countermeasure: Support, SSID hiding: Support, STA control: SSID/radio-based, User isolation: Support

IP

DHCP service: DHCP Snooping, Option 82, Server, Client, IPv4 and IPv6 address: Support, Multicast routing: Multicast to unicast conversion

Management and maintenance

FAT/FIT/MACC mode switching: Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management, Management protocol Telnet | SSH | TFTP | Web, SNMP: SNMPV1 | V2c | V3, Supported wireless LAN controllers: Ruijie WS Series Wireless Controller | Ruijie MACC-Base Software Controller | Ruijie Cloud (Public Cloud), Syslog / Debug: Support, Wireless Intelligent AI Optimization Service (WIS): Support

เว็บไซต์นี้ใช้คุกกี้
เราใช้คุกกี้เพื่อนำเสนอคอนเทนต์บริการและสินค้าผลิตภัณฑ์ที่ท่านอาจสนใจเพื่อให้ท่านได้รับประสบการณ์ที่ดีบนบริการของเรา หากท่านใช้บริการเว็บไซต์ของเราต่อไปโดยไม่ได้ปรับการตั้งค่าใดๆ เราเข้าใจว่าท่านยินยอมที่จะรับคุกกี้บนเว็บไซต์ของเรา อ่านเพิ่มเติมเกี่ยวกับคุกกี้